| Alignment
Autocollimators |
 |
| Alignment
autocollimator with straight viewing
| Article
description |
Ord.-No. |
| Alignment
autocollimator with straight viewing FAKG 300/40/14.7 |
231 901 |
|
In
alignment autocollimators with straight viewing the image will appear
mirrored an upside down. The eyepiece is orientated in a line with the
alignment axis. For this reason they are mainly used in applications
with horizontal reference line. Please consider if a right angle view
could be more useful for your set up. For example this might be the
case if used on an optical table.
Eyepiece, LED-illumination and the two reticles are included. Other
Eyepieces with focal length f=10 or f=25 are available on request. By
choosing between eyepieces with three different focal lengths, the magnification
and the field of view can be varied according to the needs of the application.
Beside LED-illumination we also do offer cold light illumination on
request. |
 |
Alignment
autocollimator with right angle viewing
| Article
description |
Ord.-No. |
| Alignment
autocollimator with right angle viewing FAKR 300/40/14.7 |
231 902 |
|
In alignment autocollimators
with right angle viewing the eyepiece is orientated on 90° towards
the reference axis. Beside the ergonomically advantages you will get
for some applications, the image will be transformed by the internal
prism to be upright but mirrored . The right angle type is mainly
used in vertical set ups.
Eyepiece, LED-illumination and the two reticles are included. Other
eyepieces with focal length f=10 or f=25 are available on request.
By choosing between eyepieces with three different focal lengths,
the magnification and the field of view can be varied according to
the needs of the application. Beside LED-illumination we also do offer
cold light illumination on request. Please specify the orientation
of reticles if they contain text elements or co-ordinates.
|
 |
Alignment
autocollimator with straight viewing and double micrometer
| Article
description |
Ord.-No. |
Alignment autocollimator
with straight viewing and double micrometer
FAKG 300/40/14.7 MDD |
231 911 |
|
Alignment
autocollimators with straight viewing and double micrometer give the
possibility to measure the displacement and tilt of a target in horizontal
and vertical direction. The displacement of a target can be calculated
by multiplying the reading in the image plane with the image magnification.
If set to infinite, the tilt of a reflector can be calculated from the
reading of the micrometers.
Eyepiece, LED-illumination and the two reticles are included. Other
eyepieces with focal length f=10 or f=25 are available on request. By
choosing between eyepieces with three different focal lengths, the magnification
and the field of view can be varied according to the needs of the application.
Beside LED-illumination we also do offer cold light illumination on
request. |
| Technical
Data |
| Focusing
range |
0
to infinity |
| Accuracy of
line of sight* |
10
µm |
| Magnification
of reticle image (approximate values) |
at 0,5 m
at 1 m
at 5 m
at 10 m
at 20 m |
5,8x
8,2x
24x
42x
77x |
| Eyepiece |
f
= 10 mm |
f = 14,7 mm |
f = 25 mm |
| Total
magnification (approximate values) |
at 0,5 m
at 1 m
at 5 m
at 10 m
at 20 m
infinity |
14,5x
16,2x
21,4x
23,6x
25,3x
28,9x |
9,9x
11,0x
14,6x
16,0x
17,2x
19,6x |
5,8x
6,4x
8,6 x
9,4 x
10,1x
11,5x |
| Field
of view |
at 0,5 m
at 1 m
at 5 m
at 10 m
at 20 m
infinty |
25 mm
35 mm
100 mm
180 mm
330 mm
1,4° |
60 mm
85 mm
250 mm
430 mm
800 mm
2,2° |
60
mm
85 mm
250 mm
430 mm
800 mm
2,2° |
| Objective |
Focal length
Free diameter |
80 mm (at
0 m) to 289 mm (infinity)
26 mm |
| Barrel
diameter |
40f7 |
| * The accuracy
of the line of sight denotes the deviation to a straight line measured
in the image plane |
|
|
|
INTRODUCTION
ALIGNMENT AUTO-
BACK